|
Alternating bit protocol (ABP) is a simple network protocol operating at the data link layer that retransmits lost or corrupted messages. It can be seen as a special case of the Sliding window protocol where a simple timer restricts the order of messages to ensure receivers send messages in turn while using a window of 1 bit. Messages are sent from transmitter A to receiver B. Assume that the channel from A to B is initialized and that there are no messages in transit. Each message from A to B contains a data part and a one-bit sequence number, i.e., a value that is 0 or 1. B has two acknowledge characters that it can send to A: ACK0 and ACK1. When A sends a message, it resends it continuously, with the same sequence number, until it receives an acknowledgment from B that contains the same sequence number. When that happens, A complements (flips) the sequence number and starts transmitting the next message. When B receives a message that is not corrupted and has sequence number 0, it starts sending ACK0 and keeps doing so until it receives a valid message with number 1. Then it starts sending ACK1, etc. This means that A may still receive ACK0 when it is already transmitting messages with sequence number one. (And vice versa.) It treats such messages as negative-acknowledge characters (NAKs). The simplest behaviour is to ignore them all and continue transmitting. The protocol may be initialized by sending bogus messages and acks with sequence number 1. The first message with sequence number 0 is a real message. ==See also== * Acknowledge character * Information Theory * Negative-acknowledge character * Stop-and-wait ARQ * Bounded Retransmission Protocol 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Alternating bit protocol」の詳細全文を読む スポンサード リンク
|